sv: Høj tomgang ved kørsel? (21-11-2013 08:44:51)
Kenneth Lystlund #4532, reg. nsj
Hej Henrik
Jeg fandt dette, måske det kan hjælpe dig videre?
The 14CUX ECU will
only go into full idle mode
when it detects the car is
stationary and the throttle position is below the idle threshold point.
This signal is used by the ECU to determine whether the car is
stationary or moving.
Its primary use is to tell the ECU when to switch into idle
mode but in some vehicles it is also used to trigger an upper speed
limit. This limit is usually restricted to 4x4s.
This signal will change with the road speed and is taken directly from the built in speed sensor fittet to the LT77 gearbox.
MLRH
Kenneth